The selection of the configuration of the elevator in the building design

Economy in the elevator Selection configuration is more concerned about the owners, mainly related to elevator equipment costs, construction costs, installation costs, operating costs, maintenance costs, customs duties and insurance costs. For the cost of equipment depends on the type of elevator, functional configuration, technical level, brand and quality grade, as well as the number of units selected based on building traffic analysis, rated speed, rated capacity, manipulation methods; civil engineering costs to be considered well and engine room of the civil costs and save shaft space and room space; installation costs to be considered equipment transportation costs, commissioning costs (some elevators in order to meet the requirements of modern construction tight deadlines, completed at the factory pre-assembly and commissioning, and elevator building part to a minimum), new ladder acceptance fee; operating costs need to consider energy-saving targets and annual inspection fees; maintenance costs need to consider the scope and duration of the warranty, the dimension premiums after the warranty period, the life of key accessories, the price paid to provide accessories .
10 new technologies in the elevator selection configuration
10.1 Schindler Miconic10 purposes floor Hall Station registration system
The system operation panel setting the car stop at each landing operation panel number corresponds to the number of each floor. Passengers simply call registration destination floor number, you will know which elevator to take the ladder group, waiting to go to the door and check in advance. By the passengers into the car no longer need to choose the layer, the car will stop destination floor staircase. Due to the ease of operation of the system and combined with powerful computer group control technology makes the car stop and riding time reduction. The key to this system is the processing of new calls waiting time originally scheduled call service time delays.
10.2 double-deck elevator
There are 2 layers of the elevator car, a layer above the other layer while running. Into the top layer of the car passengers from entering the building first floor foyer into the layer below the car, if you go to singular floors; If you go to double the number of floors first by the escalators between the 1st and 2nd floor, the second floor is reached. Can take any car left downstairs, located on the upper car passengers need to be stopped on the second floor, and then take the escalator to the first floor to leave the building. The double-deck elevators rated capacity, save hoistway space and improve the transmission capacity, especially for high-rise building high-speed straight on and from the air hall elevator. The double-deck elevators adjacent the storey are equal, and there is on the lower passenger out of the car to the desired time of maximum.
10.3 Otis Odyssey set of vertical transport and horizontal transport of intermodal transportation system
The system uses a linear motor drive, set up more than one car in a hoistway. Car under the control of the computer navigation system, you can exchange their running routes in the rail network. The system saves the space occupied by the wells, to solve the high-rise building elevator wire rope and cable weight much of a problem, especially suitable for the same on the ground floor of a multi-tower high-rise buildings to the sky lobby shuttle straight on the elevator.
10.4 AC permanent magnet synchronous machine room less elevator gear traction machine driven
Machine room less elevator traction machine and control cabinet placed in the hoistway, eliminating the need for a separate machine room, saving construction costs, an increase of the effective area of ​​the building, building architectural aesthetics design freedom. AC permanent magnet synchronous gearless traction machine is characterized by: (1) simple and compact structure, small size, light weight, flexible shape; (2) together with the frequency control can achieve a greater level of energy saving; (3) no gears, so there is no gear vibration and noise, gear efficiency, gear wear and oil lubrication problems, reducing maintenance work, reducing oil pollution; (4) the rotation of the motor due to the loss of power in the power generation braking state, increased traction the safety and reliability of the system.
The elevator on the market are also welcomed. The KONE MonoSpace MRL by the a flat dish EcoDisk motor drive the motor mounted in the engine room at the top of the side rail car, rope drive traction. Otis Gen2 elevators without machine room flat composite steel reinforced belt drive traction car, steel reinforced belt (coated with polyurethane material) flexible, easily around the sheave, so that the traction sheave directly by greatly decreases. Small traction sheave mounted directly on the the elongated motor output shaft of a gearless traction machine. The entire tractor very small, easy on the steel beams on the side of the top of the hoistway. Schindler Eurolift MRL a synthetic traction rope using high-strength steel cord traction car, this traction rope 4 times lighter than traditional steel wire rope. Each traction rope about 30 million fine fiber rope embedded in a graphite fiber conductor, making slight wear and changes in the ability to monitor traction rope.
The 10.5 color large-screen LCD floors display
Such displays may be flat or three-dimensional images of high-resolution color display can also display the real-time load, fault status of the floor of the elevator position information (such as running direction). Settings through the Control Center can also display the date, time, greetings, Floor Guide, advertising, etc., they can even be connected to the remote computer and the paging system released weather, news, etc.. Some display adds a touch of query functions. The device to ease the situation of the strange passengers in the car, depending on when face to face embarrassment, uninteresting, reduce passengers by ladder, psychological wait anxiety.
10.6 elevator remote monitoring system
The system is signal processing computer in the control cabinet elevator operation and fault information through the public telephone network or private network (using a modem) to the remote able to provide professional elevator service center for the visual interface computer, so that there service personnel in the operation of the elevator, in particular fault conditions. The system generally has a display failure analysis failure, failure statistics and forecasting functions, as well as the remote debugging and operation, easy maintenance personnel to quickly repair response and repair measures. Thus reducing troubleshooting time and simplify the labor of artificial fault checks to ensure that the building elevator safe and efficient operation.

Next：Engine room

Previous：Do not ride no elevator Posted