Escalator energy-saving environmental protection projects

Escalator is currently advocated by one of energy conservation and environmental protection projects, energy-saving reform currently escalator nationwide large-scale operation! Because, escalators and moving sidewalks in hotels, shopping malls, subways, railway stations, office buildings, hotels, airports etc place application is more, the convenience of our customers and improve the quality of service has played a very important role. But due to the particularity of its use occasions, often part of the escalator is in the idle state, it will waste a lot of energy, but also make the escalator parts (such as motor, reducer, handrail belt, etc.) from unnecessary wear and fatigue damage. Escalator running under no-load condition has become a huge waste. As a result, we assume, if can let the escalator automatically detects no-load status after a period of time, instruction escalator from running at full speed to slow down to half speed operation. In personnel access relatively infrequently, based on the above ideas, escalator detects light condition after a period of time, will be gradually slowing down until the stop running at full speed, thus can realize power savings of 20% ~ 50%. When a passenger on the escalator bed cover plate, escalator can be set up by the bed cover board at the entrance of the photoelectric sensor automatically perceive the arrival of passengers, began to run at full speed. Data calculation, the average each ladder work 8 hours a day, the one month down, you can save more than 20%. Not just for the enterprise to save the cost, but also for environmental protection out of a force, escalator energy conservation and environmental protection is the escalator reform trend.

Next：he elevator mechanical failure

Previous：Do not ride no elevator Posted